Initial configuration of the network settings
G&D VisionXS-IP-F-DP-UHR ·
22
English
Configuring global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the
local hotkey
(
default
:
Alt
+
Num
) to open the local OSD to configure the net-
work interface of the
console module
or use the
remote hotkey
(
default
:
Ctrl
+
Num
) to
open the remote OSD to configure the network interface of the
computer module
.
2. Select the entry
Network setup
and press
Enter
.
3. Select the entry
Interfaces
and press
Enter
.
4. Enter the following data under
Main Network
:
5. Press
F2
to save your settings.
Global
preferences:
Press
F8
to select the global preferences:
Static:
uses static settings.
DHCP:
obtains settings from a DHCP server.
Hostname:
Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1:
Enter the IP address of the DNS server.
DNS Server 2:
Optionally, enter the IP address of another DNS server.
Summary of Contents for VisionXS-IP-F-DP-UHR
