G&D VisionXS-IP-F-DP-UHR, Installation And Operation Manual

Page: 127 / 232

Package contents
G&D VisionXS-IP-F-DP-UHR · 6
English
Signal transmission and transmission length
G&D’s
KVM-over-IP™
technology makes it possible to transmit signals between the
computer and the console module compressed and encrypted (AES-128) using
Gigabit Ethernet (Layer 3).
If the bandwidth of the Gigabit Ethernet is sufficient, the video signal is reproduced
in a loss-free video quality and almost without any latency. By means of manual
bandwidth management you can adapt the transmission to different bandwidth
requirements (see
Limiting the bandwidth
on page 35).
When observing the max. length of sections between two
active
network components
(see section
Features of transmission modules
in the chapter
Technical data
), the entire
transmission length is unrestricted.
Package contents
Standard package contents computer modules

1 × computer module (
VisionXS-IP-CPU
).

1 × video cable (
DP-Cable-M/M-2
)

1 × USB device cable (
USB-AM/BM-2
)

1 × service cable (
2Micro-USB-Service-2
)

1 × EasyStart flyer

1 × »Safety instructions« flyer
Additional package contents of expanded variants
The package contents of expanded variants of computer modules of the
VisionXS-IP-F-DP-UHR
series
additionally
contain the cables listed below.
DT VARIANTS
1 × power cable (PowerCable-2 Standard)
A VARIANTS
1 × audio cable (Audio-M/M-2)
AR VARIANTS
1 × audio cable (Audio-M/M-2)
1 × serial connection cable (RS232-M/F-2)