G&D VisionXS-IP-F-DP-UHR, Additional Instructions For Installation And Operation

Page: 127 / 148

Configuration
G&D VisionXS-IP-F-DP-UHR · 50
English
Resetting the netfilter rules
In the default settings, all network computers can access the system’s IP address
(open system access).
With the
Config Panel
web application, you can create netfilter rules to control the
access. After a netfilter rule has been created, the open system access is deactivated
and all incoming data packets are compared to the netfilter rules.
The created netfilter rules can also be deleted with this function.
How to delete the created netfilter rules:
Config
Panel
1. In the menu, click on System .
2. Click on System defaults .
3. Select the scope of the recovery:
Reset all settings
 Reset all settings of the device.
Reset only local network settings
 Reset only local network settings.
Reset only KVM application settings
 Reset all settings except the local network settings.
4. Click on Set system defaults .
OSD
1. Open the remote OSD of the computer module by pressing
remote hotkey
(default:
Ctrl
+
Num
) if you want to reset the settings of the extender system.
Open the local OSD of the user module by pressing the
local hotkey
(default:
Alt
+
Num
) if you want to reset the local settings of the user module.
2. Select the row
Network
and press
Enter
.
3. Select the row
Reset netfilter configuration
and press
Enter
.
4. Confirm the security prompt or cancel the process.