G&D VISIONXS-F-DP-UHR Series, Installation & Operation Manual

Page: 137 / 164

Configuration
G&D VisionXS-F-DP-UHR · 52
English
Selecting a keyboard layout for inputs via OSD
If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
OSD
1. Press
Ctrl+Num
(
default
) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Under
OSD key. layout
press
F8
to select one of the following options:

german

english US

english UK

french

spanish

lat. americ.

portuguese

swedish

swiss-french

danish
4. Press
F2
to save your settings.
Co
nf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click twice on the user module ( CON-Trans 1 or CON-Trans 2 ) you want to con-
figure.
3. In the Keyboard layout field, select between the following options:
 German
 English (US)
 English (UK)
 French
 Spanish
 Latin American
 Portuguese
 Swedish
 Swiss-French
 Danish
4. Click on Save .