Configuration
45
· G&D VisionXS-F-DP-UHR
Enabling or disabling DDC/CI support
The computer and user modules supported by the
VisionXS-F-DP-UHR
system are
ready to support monitors with
DDC/CI
functionality.
After the function has been activated, the DDC/CI information is
transparently
for-
warded to the monitor in order to support as many monitors as possible. However,
we
cannot
guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
OSD
1. Press
Ctrl+Num
(
default
) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Under
DDC/CI support
press
F8
to select on of the following options:
disabled
The transmission of DDC/CI signals is disabled (
default
).
CPU > monitor
The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
bidirectional
The transmission of DDC/CI signals is carried out by
bidirectionally.
4. Press
F2
to save your settings.
Config
Panel
1. In the menu, click on
KVM extender
.
2. Click twice on the computer module (
CPU
) you want to configure.
3. Click on the tab
Video channels
.
4. Select one of the options given under
DDC/CI monitor
:
Disabled
The transmission of DDC/CI signals is disabled (
default
).
CPU > monitor
The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
Bidirectional
The transmission of DDC/CI signals is carried out by
bidirectionally.
5. Click on
Save
.
Summary of Contents for VISIONXS-F-DP-UHR Series
