G&D VISIONXS-F-DP-UHR Series, Installation & Operation Manual

Page: 123 / 164

Configuration
G&D VisionXS-F-DP-UHR · 38
English
Active console after starting an extender
When selecting the Image display option keep off / Permanently off (see page 35 f.) both
modules do not show an image after restarting the extender. Only after an input is
made at one console, its image is displayed on the monitor.
The setting Active console after start allows you to define a module whose image dis-
play you want to activate immediately after starting the extender.
How to select whether and on which module the image display is activated after
restarting the extender:
Related topics:
 Changing the time span of the input lock
on page 32
 Right for exclusive access to the console
on page 33
IMPORTANT: The activation of the
Transm. Redundancy feature
, an additional
SFP tran-
sceiver
and the connection to a second user module are prerequisites for this oper-
ation option.
OSD
1. Press Ctrl+Num ( default ) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Under Active at startup select one of the following options:
none  After restarting the extender, the image display of buth modules
is switched off ( default )
remote 1  After restarting the extender, the image display of the console
connected to Transmission 1 is activated
remote 2  After restarting the extender, the image display of the console
connected to Transmission 2 is activated
4. Press F2 to save your settings.
Config
Panel
1. In the menu, click on
KVM extender
.
2. Click twice on the computer module (
CPU
) you want to configure.
3. Under
Active console after start
select one of the following options:
None
 After restarting the extender, the image display of buth
modules is switched off (
default
)
CON (Trans. 1)
 After restarting the extender, the image display of the
console connected to
Transmission 1
is activated
CON (Trans. 2)
 After restarting the extender, the image display of the
console connected to
Transmission 2
is activated
4. .Click on
Save
.