G&D TradeSwitch2-USB, Assembly, Installation And Operation Manual, Page: 66 / 88

Configuration
19 · G&D TradeSwitch2-USB
Configuration settings
Using single or double hotkeys
If many application programs with key combinations are operated on one computer
or if different G&D devices are used in one cascade, the number of available key
combinations might be restricted.
In such a case, it is appropriate to apply double hotkeys.
How to enable single or double hotkeys:
Depending on your settings, the active hotkey is converted into a double hotkey (or
vice versa):
Setu
p Mode
1. Press
Backspace
(default:
Alt Gr+Backspace
) to enable the setup mode.
If the hotkey delay is active, press the key combination for
seven seconds
.
2. Press one of the setup keys listed below to enable single or double hotkeys:
S
 enables single hotkeys
A
 disables double hotkeys
Setup M
en
u
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow

or Arrow

keys to select the Double Hotkey row.
3. Press the Space key (repeatedly) to enable the usage of single or double hotkeys:
No  enables single hotkeys
Yes  disables double hotkeys
4. Press the S key to save your settings.
Single Hotkey Double Hotkey
Alt Gr Alt Gr+Ctrl
Win Win+Ctrl
Shift Shift+Win
Ctrl Ctrl+Shift
Alt Alt+Shift