Configuration
G&D TradeSwitch2-USB ·
32
English
Changing the bit rate of the Service port
The
Service
port of the KVM switch can be used both for operating the setup menu
and for switching the channels with a serial device.
The
Service
port transfers a certain amount of data per time unit. The bitrate is given
in
bit/s
.
If the bitrate cannot be adjusted to the standard bitrate of the KVM switch (115.200
bit/s) in the terminal emulator or the serial device, the bitrate of the
Service
port can
be modified.
How to select the bit rate of the Service port of the KVM switch:
IMPORTANT:
Transmitter and receiver of the data must use the same bitrate to
ensure successful communication between the terminal emulator or a serial device
and the KVM switch.
Se
tu
p
M
en
u
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
or
Arrow
keys to select
Service Port Config
and press
Enter
.
3. Use the
Arrow
or
Arrow
keys to select the row
Bitrate
.
4. Press the
Space
key (repeatedly) to select between the following bitrates:
9600
19200
38400
57600
115200
(default)
230400
5. After having selected your desired settings, press
Q
to leave the dialog.
6. Press the
S
key to save your settings.
Summary of Contents for TradeSwitch2-USB
