Starting web application
G&D MultiPower-12-NT ·
13
English
Starting web application
The
Config Panel
web application provides a graphical user interface monitor the cen-
tral power unit.
How to start the
Config Panel
web application:
1. Enter the following URL in the address bar:
https://[IP address of the central power unit]
2. Enter the following data in the login mask:
3. Click on
Login
.
NOTE:
The separate manual provides information about system requirements, the
required configuration of the network interface at the
MultiPower-NT
devices and
the operation of the web application.
Username:
Enter the username of an administrator account.
Password:
Enter the password of the administrator account.
IMPORTANT:
Change the administrator account's default password.
The
default
access data is:
Username:
Admin
Password:
see
login
information on the label on the bottom of the device
NOTE:
The default
admin
password for devices manufactured before
March 2020 is
4658
.
