Installation
G&D MultiPower-12-NT ·
5
English
Installation
1. Use a power loop cable to connect one of the
compatible devices (12VDC/800mA) to one of
the twelve
Power Out
sockets.
2. in the web application (see separate manual)
Connect one of the supplied power cables to the
Main Power
socket.
Connect the power cable to a power outlet.
3. If necessary, connect one of the supplied power
cables to the
Red. Power
socket to establish a redundant power supply.
Connect the power cable to a power outlet of another power circuit.
Startup
1. Switch on the power switch of the internal
Main Power
power pack.
2. Switch on the power switch of the internal
Red. Power
power pack.
NOTE:
The
MultiPower-12-NT
supplies up to twelve devices with 12 Volt.
The maximum power consumption permitted per device is 800 mA.
NOTE:
After you turn on the central power supply, the internal services of the cen-
tral power supply are started.
Within approx. 60 seconds, the last switching states (on/off) of the individual
Power Out
sockets are restored
Status
12VDC/800mA
Power Out 2
Status
12VDC/800mA
Power Out 3
12VDC/800mA
Status
12VDC/800mA
Power Out 1
Power Status
M
ULTI
P
OWER
-
12
-
NT
Main Power
Red. Power
