Increasing the number of connectable computers
G&D miniMUX4 ·
45
Monitor:
Insert the 15-pin D-Sub plug of the computer connection cable (CPU) that is
connected to the master switch.
Changing the mode of »CPU« interfaces
In the default configuration, the KVM switch is configured to connect computers to
the
CPU
interfaces.
When connecting a slave switch to one of the
CPU
interfaces, change the mode of the
interface accordingly. Now, the master switch can access the computers that are
connected to the slave switch.
How to change the mode of CPU interfaces:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
System Config
and press
Enter
.
4. Use the
Arrow keys
to select
Cascade Setup
and press
Enter
.
5. Select the interface whose mode you want to change. Press
Space
to select one of
the following options:
6. Repeat step 5 to change the mode of another interface.
7. Press
F1
to save your settings.
NOTE:
To connect the computer to the slave switch, follow the instructions on page 7.
CPU:
Connection of a computer
miniMUX4:
Connection of the
miniMUX4
KVM switch
miniMUX8; CC1/8:
Connection of the
miniMUX8
or
ControlCenter1plus-8
KVM
switch
CC1/16:
Connection of the
ControlCenter1plus-16
KVM switch
NOTE:
The On-Screen Display of the slave switch is disabled. You can operate the
switch by using the On-Screen Display of the master switch.
