Configuration
34
· G&D miniMUX4
Positioning the On-Screen Display
In the default configuration, the On-Screen Display of the KVM switch is displayed
in the middle of the console monitor. However, you can adjust the position to your
needs.
How to change the position of the On-Screen Display:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
Console Setup
and press
Enter
.
4. Use the
Arrow keys
to select
Menu Position
and press
Enter
.
5. Press the
Arrow keys
or the mouse to move the menu to the desired position.
6. Press
Enter
or the left mouse key.
7. Press
F1
to save your settings.
Adjusting the scancode set of the PS/2 keyboard
If you press a key at the PS/2 keyboard, the keyboard processor sends a data packet
that is called scancode. The two common scancode sets (sets 2 and 3) contain differ-
ent scancodes.
In the default configuration, the user module interprets any entry made at the PS/2
keyboard with the scancode set 2.
Use the scancode set 3 if you cannot enter the pipe “|” or the Arrow keys do not
work as expected.
MENU POSITION
miniMUX4
Esc
Enter
F1:Save
IMPORTANT:
Only the
Supervisor
can change this setting.
