User management
20
· G&D miniMUX4
User or Supervisor login/logout
Login as user or Supervisor
The KVM switch asks you to log in after the user module is turned on or another
user logs out:
How to log in as user or Supervisor at the KVM switch:
1. Enter the following data into the login box:
2. Press
Enter
to log in and to open the On-Screen Display.
IMPORTANT:
In the default configuration, access to the KVM switch is not pass-
word-protected (
OpenAccess
). The login box is
not
displayed after you turn on the
device. The
Select Computer
menu opens instead.
Log off the active user to open the login box (see below).
LOGIN
miniMUX4
Please enter your login:
Name:
Password:
Esc
Enter
Name:
Enter your username.
Password:
Enter the password for your user account.
NOTE:
In the default configuration, the
SUPERVISOR
account is assigned with the
password
4658
. Change this password after the first login (see page 23).
ADVICE:
Access to the KVM switch is not password-protected (
OpenAccess
) in
the default configuration. You do not need to enter a username or a password
to log in to the KVM switch.
NOTE:
A computer is automatically accessed if the access is defined in the user
account (see page 26).
