Initiation
G&D DVIVision ·
11
Initiation
After the proper installation, the DVIVision system can be immediately put into
operation.
Mind the following activation sequence while initiating the system:
1. Turn on the user module (DVIVision-CON) at the switch that is located above
the
Power
socket.
2. Turn on the computer module (DVIVision-CPU) at the switch that is located
above the
Power
socket.
3. Turn on the computer that is connected to the computer module.
After the DVIVision system has been turned on, the LEDs on the front panel of both
the computer module and the user module signal the system’s operating status. For
further advices on this topic, also see the chapter
The recommended activation sequence ensures that the DVIVision system is able
to read out the features of the connected monitor and to transmit them to the com-
puter (see
