Configuration
G&D DVIMUX2-DL-USB ·
26
English
Changing the select keys
In the default settings, use the enabled select keys
1
and
2
to switch between the
computers that are connected to the KVM switch.
For instance, you can switch to computer 2 by pressing
2
(default:
Ctrl+2
).
How to choose a different select key set:
Setup M
o
de
1. Press
Backspace
(default:
Ctrl+Backspace
) simultaneously to enable
the setup mode.
If the hotkey delay is active, press the key combination for
seven seconds
.
2. Press one of the setup keys shown below to activate the desired set of select
keys to switch between computers 1 to 2:
1
enables select keys
1
and
2
NUM 1
enables select keys
NUM 1
and
NUM 2
Z
enables select keys
A
and
B
F1
enables select keys
F1
and
F2
Setup M
en
u
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the
Monitoring
mode of the service port is
enabled. Enter »
!
« to switch to the setup menu.
2. Use the
Arrow
or
Arrow
keys to select the
Select Keys
entry.
3. Press the
Space
key (repeatedly) to enable the particular set of select keys to
switch between computers 1 to 2:
1 ... 2
enables select keys
1
and
2
NUM 1 ... 2
enables select keys
NUM 1
and
NUM 2
A ... B
enables select keys
A
and
B
F1 ... F2
enables select keys
F1
and
F2
4. Press the
S
key to save your settings.
Summary of Contents for DVIMUX2-DL-USB
Page 51: ...Deutsch...
Page 99: ...English...
