G&D DVI-Vision-CAT-AR, Installation And Operating Manual

Page: 114 / 140

Configuration
41 · G&D DVI-Vision-CAT
Keyboard required to start the user module
In the default settings, the user module starts even without a keyboard. As an alter-
native, the user module can interrupt the starting process when no keyboard is con-
nected. After you connect a keyboard to the user module, the starting process is
continued.
How to configure the starting behaviour without a keyboard connected to the
user module:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under Keyboard required press F8 to select one of the following options:
no  continue starting process without a keyboard ( default ).
yes  interrupt starting process without a keyboard..
4. Press F2 to save your settings.
Config
Panel
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
Click on the tab
Remote > General
.
3. Under
Keyboard required
select one of the following options:
No
 continue starting process without a keyboard (
default
).
Yes
 interrupt starting process without a keyboard.
4. Click
OK
to save your changes.