Status LEDs
61
· G&D DP1.2-VisionXG-Fiber
Status LEDs
The LEDs on both the front and the back panel of the computer module and the
user module let you control the operational status of the KVM extender at any time.
Meaning of the LEDs on the front panel
Meaning of the LEDs on the back panel
Area
LED
Colour Status
Meaning
Power
Red.
green
on
The power pack is turned on and supplies the
required voltage.
off
The power pack is turned off or the connection to
the mains could not be established.
Main
green
on
The power pack is turned on and supplies the
required voltage.
off
The power pack is turned off or the connection to
the mains could not be established.
Status
Ready
yellow
on
The device is ready for operation.
off
The device is not ready for operation.
flashing
Internal error
System
green
on
Initialisation has been completed successfully.
flashing
Faulty initialisation
off
Initialisation is carried out or device is turned off.
Fail
red
on
The device is not ready for operation.
off
The device is ready for operation.
Ident.
blue
on
Flashes after the LED has been activated via web
application.
Area
LED
Colour Status
Meaning
Trans-
mission
left
yellow
on
Initialisation of interface completed.
off
Initialisation of interface is carried out or device is
turned off.
right
green
on
Connetion to remote side has been successfully
established.
off
Connection to remote side could not be
established.
Summary of Contents for DP1.2-VisionXG-Fiber Series
