G&D DP1.2-VisionXG-Fiber Series, Installation And Operation Manual

Page: 122 / 156

Configuration
41 · G&D DP1.2-VisionXG-Fiber
Enabling or disabling DDC/CI support
The KVM extender is ready to support monitors with DDC/CI functionality. After the
function has been activated, the DDC/CI information is transparently forwarded to the
monitor in order to support as many monitors as possible.
How to configure the DDC/CI support:
NOTE: However, we
cannot
guarantee the support for all monitors.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Under
DDC/CI support
press
F8
to select on of the following options:
disabled
 The DDC/CI transmission is disabled (
default
).
CPU > Monitor
 The DDC/CI transmission is carried out exclusively
from the target to the monitor.
bidirectional
 The DDC/CI transmission is carried out bidirectionally.
4. Press
F2
to save your settings.
Conf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab Video channels .
4. When using a multi-channel device, click on the desired video channel and
then click on Configuration .
5. Select one of the options given under DDC/CI monitor :
Disabled  The transmission of DDC/CI signals is disabled ( default ).
CPU > monitor  The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
Bidirectional  The transmission of DDC/CI signals is carried out by
bidirectionally.
6. Click on Save .