Status LEDs
G&D DP1.2-Vision-IP-Fiber ·
105
English
Status LEDs
The LEDs on both the front and the back panel of the computer module and the
console module let you control the operational status of the KVM extender at any
time.
Meaning of the LEDs on the front panel
Area
LED
Color
Status
Meaning
Ident.
Ident.
blue
on
On as soon as the LED has been activated via
web application.
Power
Red.
green
on
The optional power pack is connected and
supplies voltage of 12 Volt.
off
The optional power pack is not (properly)
connected.
Main
green
on
The power pack is switched on and supplies
the required voltage.
off
The power pack is switched off or a connec-
tion to the power network could not be
established.
Status
K/M
green
on
The keyboard has been detected.
blinking
No keyboard connected or keyboard could
not be detected.
System
green
on
Device is ready for operation.
blinking
Executing update.
fast
blinking
Device is reset to default settings after push-
ing the Reset button for a long time.
red
on
Internal error or device booting
Status
yellow
on
The connection to the remote station has
been established.
off
The connection to the remote station could
not be established.
Network
Management
left
yellow
on
The connection to the network has been
successfully established.
off
A connection could not be established.
right
green
flickering Network activity.
off
No network activity
Summary of Contents for DP1.2-Vision-IP-Fiber
