G&D DP1.2-Vision-IP-Fiber, Installation And Operation Manual

Page: 228 / 240

Further information
G&D DP1.2-Vision-IP-Fiber · 103
English
Establishing a connection by using a terminal emulator
How to establish a connection using a terminal emulator:
1. Start any terminal emulator (e.g. Tera Term oder PuTTY ).
2. Establish a new connection via terminal emulator and enter the follwoing set-
tings:
 Bits per second: 115.200
 Data bits: 8
 Parity: None
 Stop bits: 1
 Flow control: None
3. Use the supplied USB service cable to connect the computer to the Service port on
the front panel of the user or computer module.
Determining the IP address
How to determine the IP address of a user or computer module:
1. Restart the user or computer module.
During the boot process, the terminal emulator shows various status messages.
2. After the boot process, the IP address and other system information are displayed.