Establishing a KVM-over-IP™ connection for the first time
24
· G&D DP1.2-Vision-IP-Fiber
Configuring the global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the remote hotkey
Ctrl
+
Num
to open the OSD of computer module.
2. Select the entry
Network setup
and press
Enter
.
3. Select the entry
Interfaces
and press
Enter
.
4. Enter the following data under
Main Network
:
5. Press
F2
to save your settings.
Global
preferences:
Press
F8
to select the global preferences:
Static:
uses static settings.
DHCP:
obtains settings from a DHCP server.
Hostname:
Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS 1:
Enter the IP address of the DNS server.
DNS 2:
Optionally, enter the IP address of another DNS server.
Summary of Contents for DP1.2-Vision-IP-Fiber
