Configuration
23
· G&D DP1.2-Vision-CAT
Operating the on-screen display
The on-screen display is operated with the console keyboard. The following table
shows you a list of frequently used keys:
Header
The header shows the title of the current menu.
List field
The list field shows the menu items of the selected menu.
there are two types of menu items:
Menu items
with
submenus:
These items are displayed with three dots (…) in the right col-
umn. Select these items with the
arrow keys
and press
Enter
to
open the submenu.
Menu items
without
submenus:
The current setting is shown behind the menü item and can be
changed directly.
Footer
The footer shows the most important keys to operate the cur-
rently displayed menu and further information if available.
Arrow keys:
Press the arrow keys
Up
and
Down
(in some menus also
Left
and
Right
) to move the cursor between the different menu items.
Enter:
Use this key to confirm inputs of open a submenu.
Esc:
This key closes the displayed menu and shows the superior
menu.
A message is shown if entries are changed but not saved.
Tab key:
Use this key to move the cursor within the list field from one
menu item to the next (or vice versa).
F2:
Press this key to save your settings.
The displayed menu closes after the settings are saved and the
superior menu is displayed again.
F8:
Press this key to switch between the different options of a menu
item.
Ctrl+F8:
Configuration settings with many options support this hotkey
to open a clearly-arranged list containing all options.
