Configuration
G&D DP1.2-Vision-CAT ·
48
English
Information display
Information displays are shown temporarily (5 seconds) in the upper left corner.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
ADVICE:
If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock
to repeat the caption.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Select the row
Personal Profile
and press
Enter
.
4. Under
Display
press
F8
to select between the following options:
Off
information display is turned off
Temporary
information display is shown temporarily for 5 seconds (
default
)
Permanent
permanent information display
5. Press
F2
to save your settings.
Config
Pan
el
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
Remote > Extender system > Personal profile
.
4. Under
Display
select one of the following options:
Off
information display is turned off
Temp
information display is shown temporarily for 5 seconds (
default
)
Perm
permanent information display
5. Click
OK
to save your changes.
