Installation
G&D DP1.2-Vision-CAT ·
8
English
Connecting further interfaces of ARU2 variants
USB 2.0 CPU:
Use the
USB-AM/BM-2
cable to connect one of the computer’s USB
interfaces to this interface.
USB 2.0 Trans.
Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the cable to the
USB 2.0 Trans.
interface of the user module.
NOTE:
Connect the
USB 2.0 Trans.
interface to one of the dynamic ports of the IO
card
CCD-IO16-Card-MULTI
if you want to connect the computer module to a
compatible matrix switch (see page 3).
Mind the notes in the paragraph
Purpose and configuration of multi cards
in the user
manual of the web application.
Transmission
USB 2.0 Trans.
USB 2.0 CPU
Main P
ower
Keyb./Mouse
In
Out
Line
Keyb. CPU
RS232
Red. Power
DP Out
DP CPU
USB CPU
