Switching between channels
11
· G&D DP1.2-MUX2-NT
Switching via step keys
Alternative to using
select keys
to switch between channels connected to the KVM
switch is to use the
step keys
to switch the channels in ascending or descending order.
How to use select keys to switch to a particular channel:
1. Press
»Forward« Step key
or
»Back« Step key
on the console keyboard.
IMPORTANT:
The active
step keys
depend on the selected
select keys
. The following
table lists the step keys depending on the active select keys.
Select keys
»Back« Step key
»Forward« Step key
1 … 2
9
0
NUM 1 … NUM 2
NUM 9
NUM 0
A … B
I
K
F1 … F2
F9
F10
