G&D DP-Vision-CAT Series, Installation And Operation Manual

Page: 153 / 168

Further information
66 · G&D DP-Vision-CAT
Switching the CON-2 variants
Two different computer modules (either compatible digital extenders or compatible
matrix switches) can be connected to the optionally available CON-2 variants of the
user modules.
You can select the channel of the CON-2 variants of the user modules to be connected
via the switches on the front or via configurable key combinations (select keys).
To switch the channel using the buttons:
 Press the button of the desired channel to activate it.
To switch the channel using the keyboard shortcuts:
 On the keyboard of the workstation, press the key combination
local Select key .
By default, the Select keys Alt+F1 (channel 1) and Alt+F2 (channel 2) are preset.
NOTE: Open the local OSD of the user module with the key combination Alt+Num
(default).
In the local OSD, for example, you can change the
hotkey modifier and the select key .