Configuration
54
· G&D DP-Vision-CAT
Adjusting the waiting period of the screensaver
The screensaver turns off the display of the console after the user has been inactive
for a defined period of time.
How to adjust the waiting period of the screensaver:
NOTE:
This setting does not affect the screensaver settings of the computer con-
nected to the computer module.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
if you want to adjust the screen-
saver of the remote console (at the
CON
module).
Select the row
Local console setup
and press
Enter
if you want to adjust the
screensaver of the local console (at the
CPU
module).
3. Under
Screensaver (min)
enter a waiting period (1 to 999 minutes) for the
screensaver.
Entering the value 0 disables the screensaver
.
4. Press
F2
to save your settings.
Config
Panel
1. In the menu, click on
KVM extender
.
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
.
3. Click on the tab
General
.
4. Click on the tab
CPU
if you want to configure the screensaver of the local
workstation (on the
CPU
module).
Click on the tab
CON
if you want to configure the screensaver of the remote
workstation (on the
CON
module).
5. In the
Screensaver (minutes)
row, enter the waiting time (1 to 999 minutes) of
the screensaver.
Entering the value 0 disables the screensaver
.
6. Click on
Save
.
Summary of Contents for DP-Vision-CAT Series
