Configuration
G&D DP-Vision-CAT ·
47
English
Enabling or disabling DDC/CI support
The computer and user modules supported by the
DP-Vision-CAT
system are ready to
support monitors with
DDC/CI
functionality.
After the function has been activated, the DDC/CI information is
transparently
for-
warded to the monitor in order to support as many monitors as possible. However,
we
cannot
guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under
DDC/CI support
press
F8
to select on of the following options:
disabled
The transmission of DDC/CI signals is disabled (
default
).
CPU > monitor
The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
bidirectional
The transmission of DDC/CI signals is carried out by
bidirectionally.
4. Press
F2
to save your settings.
Summary of Contents for DP-Vision-CAT Series
