G&D DP-Vision-CAT Series, Installation And Operation Manual

Page: 129 / 168

Configuration
42 · G&D DP-Vision-CAT
Activating a console after the permanent switch-off of the
image display
When selecting the Image display option Permanently off (see page 40 f.) the display is
only switched on again after the time period of the input lock has elapsed after a
user input.
In the standard setting, inputs via both keyboard and mouse cause the display to be
switched on. Alternatively, you can allow only keyboard or only mouse inputs as triggers
to activate a console. for picture activation.
How to select valid input device(s) to trigger the activation of a console:
Active console after starting an extender
When selecting the Image display option Permanently off (see page 40 f.) at both the
computer and the console module, both modules do not show an image after restart-
ing the extender.
Only after an input is made at the console, its image is displayed on the monitor.
The setting Active console after start allows you to define a module whose image dis-
play you want to activate immediately after starting the extender.
Config
Pa
nel
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. Select one of the options given under Activate console via :
 Keyboard/Mouse ( default )
 Keyboard only
 Mouse only
5. Click on Save .