G&D DP-Vision-CAT Series, Installation And Operation Manual

Page: 122 / 168

Configuration
G&D DP-Vision-CAT · 35
English
Changing the exclusive key
After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys
on page 30) and an
exclusive
key. Both keys can be selected from a
number of available keys. You can change both the hotkey modifier
Ctrl
and the
exclusive key
Print
.
How to change the exclusive key:
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
System setup
and press
Enter
.
3. Select the row
Hotkey
and press
Enter
.
4. Under
Exclusive key
press
F8
to select on of the following options:
Backspace

Backspace
key
PrtSc

Print
key (
default
)
Scroll

Scroll
key
Num

Num
key
Pause

Pause
key
Insert

Insert
key
Delete

Delete
key
Home

Home
key
End

End
key
PgUp

Page Up
key
PgDn

Page Down
key
Space

Space
key
5. Press
F2
to save your settings.
Co
nf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. In the Exclusive mode action key field, you can select a key:
You can choose between the keys Backspace , Print , Scroll , Num , Pause , Copy ,
Delete , Home , End , PgUp , PgDn and Space.
5. Click on Save .