G&D DP-Vision-CAT Series, Installation And Operation Manual

Page: 120 / 168

Configuration
G&D DP-Vision-CAT · 33
English
Opening the on-screen display via double keypress
As an alternative to opening the on-screen display (OSD) with the hotkey
Hot-
key+Num
or
Double Num
you can also open the OSD by pressing a configured
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
System setup
and press
Enter
.
3. Select the row
Hotkey
and press
Enter
.
4. Under
OSD via 2x keypress
select one of the following options:
Off
 OSD cannot be opened via double keypress (
default
)
Ctrl
 OSD is opened by pressing the
Ctrl
key twice
Alt
 OSD is opened by pressing the
Alt
key twice
Alt Gr
 OSD is opened by pressing the
Alt Gr
key twice
Win
 OSD is opened by pressing the
Windows
key twice
Shift
 OSD is opened by pressing the
Shift
key twice
Print
 OSD is opened by pressing the
Print
key twice
Cursor left
 Open OSD by pressing the
Cursor left
key twice
Cursor right
 Open OSD by pressing the
Cursor right
key twice
Cursor down
 Open OSD by pressing the
Cursor down
key twice
Cursor up
 Open OSD by pressing the
Cursor up
key twice
5. Press
F2
to save your settings.