G&D DP-HR-U, Installation And Operations

Page: 155 / 196

User module »DP-HR-U-CON-2-DH«
Target and user modules (DP-HR-U) · 150
User module »DP-HR-U-CON-2-DH«
With
DP-HR-U-CON-2-DH
user modules, you can connect up to two
DisplayPort
moni-
tors (dual-monitor), keyboard, mouse, microphone and speakers to two digital
matrix switches of the
ControlCenter-Compact
,
ControlCenter-Digital
or the
DVICenter
series by using one cable only.
At the installed console, matrix switch users can access a target module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active target
module of the DVI-U-CPU , DP-U-CPU or DP-HR-U-CPU series with up to 16 Mbit/s.
The buttons on the front panel of the user module or configured key combinations
( select keys ) let users switch between the connected matrix switches.
When using the console to access a target module connected to a dual-head com-
puter, the monitors display the separate images of the graphics outputs. When
accessing a target module with one graphics input only, only the first monitor dis-
plays an image.
Package contents
 1 × DP-HR-U-CON-2-DH user module
 1 × Power cable
 1 × EasyStart flyer
 1 × »Safety instructions« flyer
Required accessories
 2 × Category 5e (or better) twisted pair cables to connect the user module to two
the matrix switches
ADVICE: If you use the first video channel only, you are able to display resolutions
up to 4096 × 2160 @ 30 Hz (4K). Using both video channels allows resolutions up
to 1920 × 1200 @ 60 Hz. Detailed information about the supported resolutions is
given in the chapter Technical data on page 156.
NOTE: Accessing a target module occupies the entire back channel (including
Micro In
and
USB 2.0
signal). Hence, these signals are not provided to the user modules that
access the channel at a later point (multi user operation).
ADVICE: Instead of a matrix switch, you can also connect a compatible target module
to each of the two channels.