Initial configuration of the network settings
G&D DL-Vision(M/S) ·
13
Initial configuration of the
network settings
Accessing the web application requires you to configure the network settings of the
device on which the web application is operated.
The following table lists the default settings of the
Network A
network interface:
How to configure the network settings before integrating the device into the local
network:
1. Use a category 5 (or better) twisted pair cable to connect the network interface of
any computer to the device’s
Network A
interface.
2. Ensure that the IP address of the computer’s network interface is part of the sub-
net to which the device’s IP address belongs to.
3. Switch the device on.
4. Start the computer’s web browser and enter the URL
192.168.0.1
in the address bar.
5. Authenticate your user account against the web application.
6. Click the tools symbol in the toolbar.
7. Click the tabs
Network > Interfaces
.
IP allocation:
static
IP address:
192.168.0.1
Subnet mask:
255.255.255.0
Connetion type:
Auto
NOTE:
In the default, the
Network B
interface is deactivated.
IMPORTANT:
The network settings of the computer module or the user module have
to be separately configured via the integrated web application of both modules.
NOTE:
Use the IP address
192.168.0.100,
for example.
NOTE:
Use the
preset
access data to log in to the administrator account:
Username:
Admin
Password:
4658
Change the preset password of the administrator account. The manual of the
web application provides a detailed description of how to change the preset
access data.
