Configuration
49
· G&D DL-DVI-Vision-Fiber
Automatic closing of the OSD after inactivity
If desired, you can set the OSD to close automatically after a period of inactivity.
The period of inactivity can be defined by entering a value between
5
and
99
seconds.
How to change the period of inactivity after which the OSD closes:
NOTE:
To disable the function, enter the value
0
.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Select the row
Personal Profile
and press
Enter
.
4. Select the row
Close OSD when inactive for [s]
and press
Enter
.
5. Enter the desired time range from
5
to
99
seconds and press
Enter
.
6. Press
F2
to save your settings.
Conf
ig
Pan
el
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
Remote > Extender system > Personal profile
.
4. Under
Close OSD when inactive for [s]
, enter the desired time range
from
5
to
99
seconds.
5. Click
OK
to save your changes.
Summary of Contents for DL-DVI-Vision-Fiber-AR-CON
