Initial configuration of the network settings
G&D DL-DVI-MUX2-NT ·
16
English
Initial configuration of the network
settings
The basic requirement for accessing the web application is the configuration of the
network settings of the device on which the web application is operated.
Establishing a connection to the network interface
How to connect a computer to the network interface of the KVM switch:
1. Use a category 5e (or better) twisted pair cable to connect the network interface
of any computer to the device’s
Network A
interface.
2. Make sure that the IP address of the computer’s network interface is part of the
subnet to which the IP address of the device belongs.
3. Turn on the KVM switch.
Starting the web application
How to configure the settings of a network interface:
1. Start the computer's web browser and enter the URL
192.168.0.1
in the address line.
2. Enter the following data in the login mask:
NOTE:
By default, the following settings are preselected:
IP address of
Network interface A
:
192.168.0.1
IP address of
Network interface B
: Obtain address via
DHCP
global network settings: Obtain settings via
DHCP
NOTE:
Use the IP address
192.168.0.100
, for example.
Username:
Enter the username of an administrator account.
Password:
Enter the password of the administrator account.
IMPORTANT:
Change the administrator account's default password.
The
default
access data to the administrator account are:
Username:
Admin
Password:
4658
