Reset button
G&D ControlCenter-Compact ·
15
English
Reset button
The
Reset
button is placed between the
Power
LEDs and the
Identification
LED on the
front panel of the central module.
This button allows you to reset the default settings and disable the netfilter rules.
Resetting the default settings
Pressing and holding the button during the booting process resets the default settings
of the central module.
How to reset the default settings of the central module:
1. Turn off both power packs of the central module.
2. Press and hold the
Reset
button on the front panel of the device.
3. Keep the button pressed and turn the device on.
4. Release the button when the green
Status
-LED starts blinking.
NOTE:
To prevent you from pressing the button by accident, you are required to
use a thin, pointed object for pressing the button.
NOTE:
After the function has been carried out, the default settings of the central
module do apply again. However, the purchased premium functions remain
unaltered.
NOTE:
You can also use the
Config Panel
web application to reset the default settings.
Summary of Contents for ControlCenter-Compact
