G&D ControlCenter-Compact, Manual

Page: 49 / 68

Initial configuration of network settings
G&D ControlCenter-Compact · 13
English
Initial configuration of network settings
Accessing the
Config Panel
web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.
Configuring network ports
A central module, which is integrated into the network, can only be addressed after
the network ports are configured.
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press
Enter
to login and open the on-screen display.
3. Press
F11
to call the Configuration menu.
NOTE: In the defaults, the following settings are pre-selected:

IP address of
network interface A
:
192.168.0.1

IP address of
network interface B
: address obtained using
DHCP

global network settings: settings obtained using
DHCP
ADVICE: Use the information menu to retrieve the IP addresses of the
network interfaces A and B.
After opening the on-screen display (OSD), press
F12 , select the line
Hardware information . and press Enter .
Username: Enter a username.
Password: Enter a password for your user account.
IMPORTANT: Change the administrator account's default password.
The default access data is:

Username:
Admin

Password: see login information on the label on the bottom of the device
NOTE: The default
admin
password for devices manufactured before
November 2020 is
4658
.