G&D ControlCenter-Compact, Manual

Page: 46 / 68

Installation
10 · G&D ControlCenter-Compact
Network interfaces
Network A: If required, plug in a category 5e (or better) twisted-pair cable,
which is available as accessory.
Connect the other end of the cable to a network interface of the local network.
Network B: If required, plug in a category 5e (or better) twisted-pair cable,
which is available as accessory.
Connect the other end of the cable to a network interface of the local network.
NOTE:
You need to connect the central module to one or two local networks to
configure the central module via Config Panel web application and use the
enhanced network functionalities (for example authentication against directory
services, time sync via NTP server, netfilter or syslog).
IMPORTANT: If you change the configuration of the Dynamic Ports in the web applica-
tion, or if you enable the signalling of the Dynamic Ports modes, end the connection to
the web application and remove the twisted-pair cable from the network port at the
central module.
Network A
Network B 18 20 22
24
26 28
17 19 21 23 29 27 25
Dynamic Ports
8
Rx Tx
2
Rx Tx
4
Rx Tx
6
Rx Tx
16
Rx Tx
10
Rx Tx
12
Rx Tx
14
Rx Tx
1 Rx Tx
3
Rx Tx
5
Rx Tx
7
Rx Tx
9
Rx Tx
11
Rx Tx
13
Rx Tx
15
Rx Tx