G&D CATVision, Installation And Operation Manual

Page: 94 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
5.4.2 Calling up the IVT Mode
The IVT mode can be called up in two ways (Default):

via function menu CTRL & NUM

via hotkey CTRL & Scroll .
The following window opens:
I V T
A c t i v e c h a n n e l : 1
C V M
Boost 4
Noise filter 0
Fine tuning 36
delay R delay G delay B
0 ns 0 ns 0 ns
ESC: quit IVT menu
F1: save and quit
F3: copy to all channels
1/2/3/4: select channel
F5: auto adjust active channel
F6: auto adjust all channels
The IVT menu can be called up from the remote or the local console. Settings
within the IVT menu, however, are only possible via remote console . IVT
settings from the local console can only be proceeded by the administrator.
If a user from the local console wants to change the settings the following
window opens:
I n f o C V M
IVT is only available
on remote console.
Press ESC to return.
By pressing ESC you will get back to the last active menu.
page 20