G&D CATVision, Installation And Operation Manual

Page: 134 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
page 60
8.3 RS232
With the port RS232 external devices can be connected to CATVision . These
devices must have the following characteristics:
 Transmission rate: up to 200 meter:max 38400 bits/sec
up to 100 meter:max 57600 bits/sec
 Transmittable signals: TxD, RxD, RTS, CTS, DTR, DSR
8.4 USB 1.1 transmission
Due to the used technologie you overcome the transmitting limitation of the USB
standard between the PC and the USB – device.(normally up to 5 meter).
With the
CATVision-System
USB-devices can be connected up to 200 meter to the
local PC.
Special note to the compatiblity of the transparent USB 1.1 connection:
The USB-conncection complies with the specification of the USB 1.1 standard,
which defines the design of USB full-speed devices. However, the manufacturer
does not gurantee, that all USB full-speed devices are compatibel to the
CATVision .