Guntermann & Drunck GmbH
Operating Instructions
CATVision (MC)
6.2.2.18
Signal type input
To ensure the correct display of the transmitted video signal you find selection
in this menu, which type synchronisation signal is available as input video
signal.
The options are:
Standard: comprises RGB HV, RGsB, RsGsBs
RGsB/HV: Sync on green and additionally seperated HV
6.2.2.19
Remote sync
Basically, two options are available at the entry „Remote sync“. These are:
Separated H/V
as input
When CATVision detects seperated HV signals, the value behind the entry
„Remote sync“ changes to „Separated H/V“. This entry is not editable.
When no seperated HV signals can be detected, you still have the possibilty to
deliver seperated HV signals by choosing the value „Separated H/V“.
With the value „as input“ the signal will be transmitted without any changes from
the PC to the CATVision system.
6.2.3
User Account
Move in the
Config Menu
to the entry
User Account
and press
Enter
. The
following window will open:
User Account
CVM
1
USER 01
2
USER 02
3
USER 03
4
USER 04
...
bis User 08
OpenAccess
SUPERVISOR
Esc
Enter
Here you select the
USER ACCOUNT
which you want to change.
Move the cursor with the keyboard or mouse to the corresponding account.
page 44
Summary of Contents for CATVision
