Installation Guide
G&D CATCenter NEO
·
18
Activating or resetting the PS/2 mouse of the local targets
Unlike USB mouse devices, PS/2 mouse devices do not support the hot plug tech-
nology. It is therefore possible to insert the PS/2 plug while operating but possibly
the target module or the computer connected to it does not detect the input device.
To activate or reset the PS/2 mouse, a special command can be sent from the
CATCenter
system to the computer connected to the target module.
Hint:
Since the commands differ depending on the used mouse type and the
installed operating system, four different functions are provided.
How to start and use the
Mouse utility f
unction:
Activate the OSD as described above and mark the row
Mouse utility
.
Select one of the following functions with the arrow keys and press
Enter
:
Reset Mouse:
resets the PS/2 mouse interface of a Windows computer
Enable mouse
(for Unix):
activates the PS/2 mouse of a Linux computer
Enable Intelli:
activates the PS/2 wheel mouse of a Linux computer
Enable Intelli-
Explorer:
activates the PS/2 wheel mouse with additional keys of a
Linux computer