Installation Guide
G&D CATCenter NEO
·
10
Connection via the user module UCON
-s
Insert one end of the category 5 (or better) twisted pair cable into the
Transmission
port of the user module.
Connect the other end of the twisted pair cable to any of the 16
Console
ports of
the matrix switch
CATCenter NEO
.
Connect the monitor to the
Monitor
interface of the user module.
Connect keyboard and mouse to the user module.
Tip:
Both input devices can be connected to the respective PS/2 or USB port.
A mixed connection (e. g. PS/2 mouse and USB keyboard) is possible.
Optional:
If further (max. 2) local target computers are to be connected to the
user module, the target computers have to be provided with a target module.
At last, connect the twisted pair cable of the target module to the
CPU1
or
CPU2
interface of the user module.