1.
Introduction and Setup
Unpacking and In the Box
Thank you for choosing our Nano Beam. For your own safety, please read this manual before
installing or using the device. This manual covers the important information on installation and
applications. Please install and operate the fixture with following instructions. Meanwhile,
please keep this manual for future needs.
In the box you will find:
•
Nano Beam Fixture:
1
•
IEC Power Cable:
1
•
DMX Signal Cable
1
•
Omega Bracket
1
Mounting and Operation
Clamp Mounting: The Nano Beam moving head provides a unique mounting bracket
assembly that integrates the bottom of the base, and the safety cable rigging point in one
unit.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
included omega bracket using a M10 screw fitted through the center hole of the “omega
bracket”.
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly.
Features
•
60w RGBW Beam LED fixture with a 2 degree beam angle.
•
Fast 540 degree pan and 270 degree tilt.
•
DMX, Master/Secondary, Sound-Active Modes
Safety Precautions
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.
Caution: For added protection mount the fixtures in areas outside walking paths, seating
areas, or in areas were the fixture might be reached by unauthorized personnel.
Nano Beam – GAMMA LED Vision
Page 3 of 13
