Gamma CADIAX 4 A, Operating Instructions Manual

Page: 36 / 80

CADIAX compact
36
Occlusion paper marks the contacts between the clutch and upper jaw teeth, which have to be
removed.
If the plastic has not completely set yet, you can lay the clutch aside and begin mounting the
upper face bow.
Prepare the cement according to the manufacturer's in-
formation.
Fix the clutch with the cement on the lower jaw teeth.
Do not fix the para-occlusal clutch onto painful or loose teeth.
After the registration, the clutch can be removed easily. The teeth will only need a light cleaning (scal-
ing). The same plastic-coated clutch can be re-used for the same patient (residues on the clutch do not
necessarily need to be removed).
3.4 Mounting the anatomic facebow
3.4.1 Preparing the upper face bow
The flag adapters for the Reference AB face bow have to
be mounted before use, if this is not already the case.
Fixate the adapters with the accompanying screws and
screwdriver to the posterior ends of the face bow. The
bore for the fixing screw (the hole with the countersink)
must face forward.
The upper face bow is now ready to be mounted.