User Manual
36
Thermostat
Using the thermostat
For use and settings of the thermostat, please
refer to the manual supplied with this product.
XR02CX for GM2/212MU and GM/212VS.
To see the set point.
1.
Push and immediately release the
SET
key, the set point will
be showed;
2.
Push and immediately release the
SET
key or wait about 5 sec
to return to normal visualisation;
To change the set point.
1.
Push the
SET
key for more than 2 sec to change the set point
value;
2.
The value of the set point will be displayed and the °C or °F
LED starts blinking;To change the SET value push the o or n
arrows within 10 sec.
3.
To memorise the new set point value push the
SET
key again
or wait 10sec.
XR07CX for GM2/2 and GM2/22.
To see the set point.
1. Push the
SET
key two times, the set point will be showed.
2. Push the
SET
key three times to return to normal visualisation.
To change the set point
1.
Push the
SET
key for more than 2 sec and then push the SET key
again;
2.
The value of the set point will be displayed and the “°C” LED starts
blinking;
3.
To change the Set value push the
UP
or
DOWN
button;
4.
To memorise the new set point value push the
SET
key three
times.
