IF 610 Installation and Operation Manual
Issue 3, 10/04/00
Firmware Ver. 7
78
Display Config
The system module configuration is displayed when option 1 is selected from the
Configuration Menu. This display shows the modules that are present in each card
location, their associated card type, code and a description of the card. The modules
displayed are retrieved from the system configuration memory and are not a real time scan
of the actual cards present (refer to the system test menu for a real time display).
Configuration Menu
1=Display 2=Download 0=Exit
>1
Card:0, ID:0C is CCM0: A/N Panel
Card:1, ID:FF is Vacant
Card:2, ID:FF is Vacant
Card:3, ID:FF is Vacant
Card:4, ID:01 is CCM4: 2 Sig Ckt, Class A
Card:5, ID:02 is CCM5: 4 Rel Ckt
Card:6, ID:05 is CCM6: Misc. Ckts.
Card:7, ID:FF is Vacant
Card:8, ID:FF is Vacant
Card:9, ID:FF is Vacant
Card:10, ID:FF is Vacant
Card:11, ID:FF is Vacant
Card:12, ID:FF is Vacant
Card:13, ID:FF is Vacant
Card:14, ID:FF is Vacant
Card:15, ID:FF is Vacant
Card:16, ID:FF is Vacant
Card:17, ID:09 is Analog Addressable Module
Press AnyKey To Continue
System
Configuration
Modular
Placement
Select this field to view the system modular placement (hardware configuration,
card identification number and I/O card type assignment). The IF 610 series
systems utilize a fixed card placement design for identifying I/O module types.
In the IF 610 the card locations are pre-defined and cannot be altered.
Card numbered 0 through 7 are reserved for the various common control module
sections. These card location numbers are hardwired physical circuits.
Card #17
The IF 610 utilizes card location number 17 for the analog addressable interface
module. All other card locations (8 through 39) are shown as vacant.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
