Game Composites GB1 GameBird, Maintenance Manual

Page: 170 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
32-10
Brake assembly, drawing and parts list
NO. PART NO DESCRIPTION QTY
1 023-008A/M Caliper Body 1
2 021-006 Bleeder Cap 1
3 021-001 Bleeder Assy 1
4 M83248/1-217 O-Ring (Viton) 2
5 017-003 Piston 2
6 012-002 Press Plate 1
7 066-111 Brake Pad 2
8 066-001 Rivet 6
9 014-003 Back Plate 1
10 013-008 Torque Pin 2
11 MS21042-4 Nut 2
12 AN4H-16A Bolt 3
13 AN960-416L Washer 5
Axle
Type: 5013
Manufacturer:
Grove Aircraft
1800 Joe Crosson Drive, El Cajon, CA 92020, USA
www.groveaircraft.com
To service an axle:
1. Remove the landing gear fairing, wheel assembly and caliper assembly as described above
2. Remove the four bolts which secure the axle to the leg
3. Remove axle and torque plate
4. Clean and inspect contact surfaces of gear leg for excessive corrosion or cracks
5. Assemble axle, mount torque plate in its original, clocked position
6. Torque bolts with 70’’/ lbs.
7. Lockwire bolts
Signature
8. Check for correct installation