Gamatronic Electronic Industries Ltd.
POWER+
SA
User Guide, Release 1.6
21
AC INPUT SCREEN
To see the current status of the AC input to the UPS, from the Main Screen, press
three times.
The checkmark indicates that the AC voltage of each input phase is within an
acceptable range; otherwise an “
X
” is displayed instead of the checkmark.
The voltage and current for the three input phases is displayed.
BYPASS SCREEN
To see the current status of the Bypass, from the Main Screen, press
four
times.
The checkmark indicates that the voltage of all three phases at the Bypass Switch is
within an acceptable range. If the voltage of any of the phases is out of range, an
X
is displayed instead of the checkmark.
The voltage and current for the three Bypass phases is also displayed.
