How to operate.
Cleaning and changing the filters
HO
W T
O O
P
ER
A
T
E
Before first use, the Rediair filters
must be removed from their
protective packaging, making sure
the retaining straps point outwards
before installation.
NOTE
Before dismantling Rediair to perform
filter maintenance/replacement,
a local risk assessment should
consider the appropriate PPE.
WARNING
Cleaning a pre-filter
• The surface of the pre-filter can be
vacuumed with a HEPA filter if available.
• The pre-filter can also be rinsed with
clean water but must be completely
dry before being used again as any
remaining moisture could potentially
cause damage to the HEPA 14 filter.
Cleaning and changing times
• Pre-filters are to be cleaned twice
a month and replaced twice a year.
• Main filters are to be
replaced twice a year.
• Clean all external surfaces frequently.
• The ioniser is located within the
device and can’t be replaced.
• The particle sensor should be
cleaned every 2 months.
Please refer to the next 7 steps on
how to clean the Rediair pre-filters,
air outlet and particle sensor.
µg/m
3
PM2.5
1h 2h 4h 8h 12h
AUTO
FILTER
TIMER
LOCK
POWER
MODE
SPEED
FILTER
TIMER
LOCK
1
When filter indicator (on the
LCD touch control panel)
flashes red intermittently
,
it is time to clean the pre-filters.
Always unplug the Rediair before
dismantling device to perform filter
maintenance/replacement.
WARNING
1
Refer to the main Rediair product
manual for more information.
